Agilent N1913 14A EPM Series Firmware Revision history N1913A N1914A EPM Series Firmware Revision History free download

File name N1913_14A_EPM_Series_Firmware_Revision_history N1913A N1914A EPM Series Firmware Revision History.tx

N1913A and N1914A EPM Series Power Meters Firmware Revision History ------------------------------------------------------------------- Pls refer to "www.agilent.com/find/epm for more details. Release A.01.09 (10 September 2013) ------------------------------- - Resolved the issue of N191xA occasionally does not reply to the TCP socket connection requests from the customer's controller. - Enable TCP keep alive value configuration through web browser - Support USB-LAN adaptor for USB sensor connection - Resolved the issue of meter unable to accept new connection after many LAN restart - Resolved the issue of E9300H/ 1H having high offset after 1mW ref cal. Release A.01.08 (20 March 2013) ------------------------------- - Provide compatibility with U848xA series USB Thermocouple Sensor firmware A.01.01 only - Resolved DISP:ENAB 0 bug - Resolved erroneous error message displayed when self test with the 8481D/8485D/8487D - Resolved minor display issues in Save/Recall menu Release A.01.07 (22 Feb 2013) ----------------------------- - Fixed timeout error for SERV:OPT? command - Allow user to set frequency to 0Hz - Bug fix on FETCH:DIFF? command - Bug fix on 436/ 7/ 8 emulation codes - Fixed CW self-test issue Release A.01.06 (02 Jan 2012) ----------------------------- - 200ft cable supportability - Bug fix on *DDT? command returning unknown content on visa socket connection - Inclusion of SERV:OPT? command - Bug fix on unwanted frequency change when working with U2000 sensors. - Bug fix on SYST:LANG SCPI command - Bug fix on synchronization of Cal Factor value on GUI during remote operation. Release A.01.05 (30 Sept 2011) ------------------------------ - Bug fixes on compatibility with USB sensors - Bug fix on 436/7/8 emulation codes (option 200) - Message queue size increased Release A1.01.04 (30-May-2011) --------------------------------- Display measurement data on power meter once the USB power sensor is connected at power ON. Release A.01.03 (23 August 2010) -------------------------- - Enable N848x (CFT option) for 436/7/8 emulation codes (option 200) - Enable accepting commands with/without newline for 436/7/8 emulation codes (option 200) - Bug fix on 436/7/8 emulation codes (option 200) Release A.01.02 (10 March 2010) -------------------------- -Upgrade communication board flash codes Release A.01.01 (1-Jan-2010) ----------------------------- - Enabled recorder output auto-scaling feature - Bugs fix on 436/7/8 emulation codes (option 200) Release A.01.00 (9-June-2009) ----------------------------- Initial release.